During the summer fallow period of the sugarcane production cycle, glyphosate in conjunction with frequent tillage is used to destroy sugarcane regrowth and reduce perennial weed infestations. For tillage to be reduced or eliminated in fallowed fields, weed control must be maintained and sugarcane must be completely destroyed so as not to interfere with the subsequent planting operation. Field studies were conducted to evaluate glyphosate rates and formulations for control of sugarcane, bermudagrass, and johnsongrass. Glyphosate (isopropylamine salt) applied in April at 1.68, 2.24, and 2.80 kg ai/ha controlled 15-cm sugarcane at least 95% 42 d after treatment (DAT). Control of 25- and 40-cm sugarcane was maximized at 1.68 kg/ha (91 and 86% control, respectively). In another study, 25-cm sugarcane was controlled equally with isopropyl amine and potassium salt glyphosate formulations. Bermudagrass control 40 d after glyphosate was applied at 1.12 kg/ha was 86% and increased to 98% when the same rate was applied sequentially. In fallowed sugarcane fields, conventional-tillage, reduced-tillage, and no-tillage programs were implemented from mid-April through mid-August to evaluate weed control and economics. When a glyphosate application was substituted for a tillage operation, bermudagrass and johnsongrass control was increased compared with the conventional tillage alone program, but differences in sugarcane and sugar yield among the various programs the following year were not observed. Based on 2006 costs, elimination of a single tillage operation reduced cost $18.49/ha and addition of glyphosate (2.8 kg/ha plus application cost) increased cost $43.47/ha. Total cost for the conventional tillage–alone fallow program was $110.94/ha; where herbicide was used in the reduced-tillage and no-tillage programs, total cost was $19.47 to $77.38/ha more.

Bispyribac-sodium is an efficacious herbicide for annual bluegrass control in creeping bentgrass fairways, but turf tolerance and growth inhibition may be exacerbated by low mowing heights on putting greens. We conducted field and greenhouse experiments to investigate creeping bentgrass putting green tolerance to bispyribac-sodium. In greenhouse experiments, creeping bentgrass discoloration from bispyribac-sodium was exacerbated by reductions in mowing height from 24 to 3 mm, but mowing height did not influence clipping yields or root weight. In field experiments, discoloration of creeping bentgrass putting greens was greatest from applications of 37 g/ha every 10 d, compared to 74, 111, or 222 g/ha applied less frequently. Chelated iron effectively reduced discoloration of creeping bentgrass putting greens from bispyribac-sodium while trinexapac-ethyl inconsistently reduced these effects. Overall, creeping bentgrass putting greens appear more sensitive to bispyribac-sodium than higher mowed turf, but chelated iron and trinexapac-ethyl could reduce discoloration.

Field studies were conducted in Powell, WY, in 2006 and 2007 to determine the influence of season-long interference of various Venice mallow densities and duration of interference on sugarbeet. Sucrose concentration was not affected by Venice mallow interference. The effect of Venice mallow density on sugarbeet root and sucrose yield loss was described by the rectangular hyperbola model. Root and sucrose yield loss increased as Venice mallow density increased. The estimated asymptote, A (percent yield loss as density approaches infinity) was 61% for both root and sucrose yield loss, and the estimated parameter, I (percent yield loss per unit weed density as density approaches zero) was 6% for both root and sucrose yield loss. Sugarbeet root yield decreased as the duration of Venice mallow interference increased. The critical timing of weed removal to avoid 5 and 10% root yield loss was 30 and 43 d after sugarbeet emergence, respectively. Results show that Venice mallow is competitive with sugarbeet implying that it should be managed appropriately to reduce negative effects on yield and prevent seed bank replenishment and re-infestation in subsequent years.

When solid stands of foxtail millet are cut for swath grazing, the grazing season for cattle is extended and winter feeding costs reduced. The economic success of this practice depends on inexpensive weed control. Eight single- and double-rate herbicide combinations (g ai/ha) were evaluated and compared to a weed-free check: MCPA + bromoxynil (280 + 280 or 560 + 560); MCPA + clopyralid (560 + 100 or 1120 + 200); MCPA + fluroxypyr (562 + 108 or 1124 + 216); and MCPA + clopyralid + fluroxypyr (560 + 100 + 144 or 1120 + 200 + 288). This study was conducted at Indian Head, Saskatchewan (SK) in 2004, 2005, 2006, and 2007 and at Scott, SK, in 2006 and 2007. Crop injury and dry matter yield were measured. Results of the study indicate that crop injury exceeded 20% at only one out of six sites at 7 to 14 d after herbicide treatment. Double-rate MCPA + bromoxynil treatments had higher injury ratings than the weed-free check 7 to 14 d after treatment in all site years. As the growing season progressed, injury ratings tended to decline except at Scott in 2007, where injury ratings at the 21 to 35 d period were numerically greater than the other two rating periods. There were no differences among treatments for crop biomass production. We conclude that all four herbicide combinations at the labeled rate are safe to use on foxtail millet in Saskatchewan, and probably in other areas with similar environmental growing conditions.

There is an urgent need to accelerate the development and implementation of effective organic-compliant herbicides that are environmentally safe and that help the producer meet increasing consumer demand for organic products. Therefore, greenhouse experiments were conducted to evaluate the effectiveness of acetic acid (5%), acetic acid (30%), citric acid (10%), citric acid (5%) + garlic (0.2%), citric acid (10%) + garlic (0.2%), clove oil (45.6%), and corn gluten meal (CGM) compounds as natural-product herbicides for weed control. The herbicides were applied to the broadleaf weeds stranglervine, wild mustard, black nightshade, sicklepod, velvetleaf, and redroot pigweed and to narrowleaf weeds crowfootgrass, Johnsongrass, annual ryegrass, goosegrass, green foxtail, and yellow nutsedge. The herbicides were applied POST at two weed growth stages, namely, two to four and four to six true-leaf stages. CGM was applied PPI in two soil types. Citric acid (5%) + garlic (0.2%) had the greatest control (98%) of younger broadleaf weeds, followed by acetic acid (30%) > CGM > citric acid (10%) > acetic acid (5%) > citric acid (10%) + garlic (0.2%), and clove oil. Wild mustard was most sensitive to these herbicides, whereas redroot pigweed was the least sensitive. Herbicides did not control narrowleaf weeds except for acetic acid (30%) when applied early POST (EPOST) and CGM. Acetic acid (30%) was phytotoxic to all broadleaf weeds and most narrowleaf weeds when applied EPOST. Delayed application until the four- to six-leaf stage significantly reduced efficacy; acetic acid was less sensitive to growth stage than other herbicides. These results will help to determine effective natural herbicides for controlling weeds in organic farming.

Geospatial technologies are increasingly important tools used to assess the spatial distributions and predict the spread of invasive species. The objective of our research was to quantify and map four dominant invasive plant species, including saltcedar, Russian olive, Canada thistle, and musk thistle, along the flood plain of the North Platte River corridor within a 1-mile (1.6-km) buffer. Using the Airborne Imaging Spectroradiometer for Applications (AISA) hyperspectral imager (from visible to near infrared), we evaluated an image processing technique known as spectral angle mapping for mapping the invasive species distribution. A minimum noise fraction algorithm was used to remove the inherent noise and redundancy within the dataset during the classification. The classification algorithm applied on the AISA image revealed five categories of invasive species distribution including (1) saltcedar; (2) Russian olive; and a mix of (3) Canada and musk thistle, (4) Canada/musk thistle and reed canary grass, or (5) Canada/musk thistle, saltcedar, and reed canary grass. Validation procedures confirmed an overall map accuracy of 74%. Saltcedar and Russian olive classes showed producer and user accuracies of greater than 90%, whereas the mixed categories revealed accuracy values of between 35 and 74%. The immediate benefit of this research has been to provide information on the spatial distribution of invasive species to land managers for implementation of management programs. In addition, these data can be used to establish a baseline of the species distributions for future monitoring and control efforts.

Weeds are a major constraint in tomato production, especially in the absence of methyl bromide. Field trials were conducted in 2006 and 2007 to evaluate the integrated use of a mustard ‘Caliente’ (a blend of brown and white mustard) cover crop with one-half and full rate PRE/POST herbicides for weed control and crop response in polyethylene-mulched tomato. Caliente was flail mowed and incorporated into the soil prior to forming beds. PRE herbicides were applied under polyethylene mulch, and POST herbicides were sprayed over the top of tomato. Full rates for S-metolachlor, halosulfuron, and trifloxysulfuron were 1,600, 27, and 7.9 g ai/ha, respectively. Caliente had no effect on weed control or tomato injury and yield. Except for large crabgrass control and tomato injury and yield, only the main effect of herbicide selection and application rate affected these parameters. Tomato injury was minimal (< 6%) from PRE- and POST-applied herbicides. S-metolachlor applied PRE provided 66% purple nutsedge, 67% yellow nutsedge, and 77% Palmer amaranth control at 4 wk after transplanting (WATP). S-metolachlor–treated plots at the full rate produced the highest marketable fruit yield among herbicide treatments, with jumbo fruit yield equivalent to the hand-weeded treatment. Trifloxysulfuron was the best POST-applied herbicide based on marketable yield and weed control. POST-applied trifloxysulfuron provided 41% purple nutsedge, 58% yellow nutsedge, and 55% Palmer amaranth control at 8 to 9 WATP. Halosulfuron applied PRE controlled purple and yellow nutsedge 70 and 78%, respectively, at 4 WATP, and POST-applied halosulfuron controlled purple nutsedge 74% and yellow nutsedge 78% at 8 to 9 WATP. Halosulfuron applied either PRE or POST failed to control Palmer amaranth and large crabgrass. Greater weed control and marketable tomato yield were achieved with full rates of herbicides. This research demonstrates no additional advantage of Caliente mustard when used with herbicides in tomato. None of the PRE or POST herbicides applied alone were sufficient to maintain season-long, broad-spectrum weed control and optimum marketable yield in tomato. Therefore, integration of PRE and POST herbicides at full rates is suggested.

Dose-response experiments were conducted on a biotype of prickly lettuce collected from Whitman County, WA, to determine the level of resistance to 2,4-D. Initially, progeny of prickly lettuce that survived two applications of glyphosate and 2,4-D in mixture were collected to determine if antagonism of the 2,4-D or glyphosate was occurring. Prickly lettuce survival was determined to not be due to antagonism of 2,4-D or glyphosate when the two herbicides were applied in mixture. The doses required to reduce growth 50% (GR50 ) for resistant and susceptible field-collected prickly lettuce were 150 and 6 g ae/ha 2,4-D, respectively, indicating the resistant biotype was 25 times more resistant to 2,4-D than the susceptible biotype. The resistant biotype expressed injury but produced regrowth following application. A dose of 2,4-D at 220 g/ha was required to reduce regrowth frequency 50% (FR50 ) for resistant field-collected prickly lettuce. Regrowth was also observed with the susceptible biotype, although the FR50 was much lower (10 g/ha), resulting in an R/S ratio of 22 based on the respective FR50 values. A rate of 4,300 g/ha 2,4-D (10 times the maximum labeled rate in wheat) was required to reduce the regrowth frequency in the resistant biotype to zero.

Reflectance data were subjected to a variety of analysis methods to determine the utility of hyperspectral reflectance for differentiating soybean, soil, and six weed species commonly found in Mississippi agricultural fields. Weed species evaluated were hemp sesbania, palmleaf morningglory, pitted morningglory, prickly sida, sicklepod, and smallflower morningglory. Hyperspectral reflectance data were collected from mature plant leaves three times in 2002 and two times in 2003. Vegetation indices were calculated and subjected to principal component analysis (PCA) and linear discriminant analysis (LDA). The PCA, using vegetation indices, produced the poorest classification accuracies for the plant species studied, generally less than 50%, whereas LDA resulted in classification accuracies greater than those from PCA. Best spectral band combination (BSBC) provided the greatest classification accuracies, with all better than 80% for all data sets. The BSBC indicated three wavelength bands of interest for species discrimination in the short wavelength infrared portion of the electromagnetic spectrum, which are not commonly used in current vegetation indices for species differentiation. These areas of interest were located from 1,445 to 1,475 nm, 2,030 to 2,090 nm, and 2,115 to 2,135 nm. The top 10 wavelengths determined by BSBC were then added to the vegetation indices and reanalyzed using PCA and LDA. Classification accuracies increased for all species when these wavelengths were added rather than using vegetation indices alone, suggesting greater crop and weed species differentiation can be obtained when using sensors that include these wavelength regions of the short wavelength infrared portion of the electromagnetic spectrum.

Potato producers rely heavily on herbicides for the majority of weed control. However, recent occurrences of herbicide-resistant weed populations and the lack of new herbicide registrations have stimulated interest in alternative strategies. The choice of potato cultivars that can suppress or tolerate weed competition could be a component of an integrated weed management system to reduce reliance on herbicides. The competitive ability of 10 potato cultivars—‘Atlantic’, ‘Bannock Russet’, ‘Dark Red Norland’, ‘Goldrush’, ‘Rodeo’, ‘Russet Burbank’, ‘Russet Norkotah’, ‘Snowden’, ‘Superior’, and ‘Villetta Rose’—was evaluated in 2006 and 2007 in Hancock, WI. Weed competition treatments included (1) weedy throughout the season, (2) weed-free from emergence to 4 wk after emergence (WAE) by hand-weeding, and (3) weed-free by hand-weeding for the entire season. Potato cultivars did not differ in ability to reduce weed biomass. Early-season time of potato emergence and canopy closure, as well as weed competition treatments, were strongly related to potato tuber yield. In general, Bannock Russet yield relative to weed-free controls of the same cultivar was less than that of most other cultivars. Overall, Atlantic, Russet Burbank, Snowden, and Superior yields (relative to weed-free control yields) usually were greater than the yields of other cultivars under weedy conditions. Although the ability to suppress weeds was similar among cultivars, differences in yield among cultivars grown in the presence of weeds suggest differential tolerances of weed competition.

Two greenhouse studies were conducted to investigate the variability in tolerance to a sublethal dose of glyphosate among accessions of pitted morningglory, hybrid morningglory (a fertile hybrid between pitted and sharppod morningglory), and sharppod morningglory, collected from several states in the southern United States. The first study was conducted to evaluate the variability in tolerance to glyphosate among accessions. Glyphosate at 420 g ae/ha was applied to plants at the four- to five-leaf stage, and control (percent shoot fresh weight reduction) was determined 2 wk after treatment (WAT). Pitted morningglory response ranged from −9% (indicating no response to glyphosate) to 39% control. A similar trend was observed in hybrid morningglory. Control of two related species, cypressvine morningglory and red morningglory, averaged 40 and 29%, respectively, and was similar to control of the most susceptible pitted morningglory and hybrid morningglory accessions. Ivyleaf morningglory control was 9%. Sharppod morningglory control was highest (48%) among the morningglories studied. A second study was conducted to determine levels of tolerance to glyphosate based on GR50 (dose required to cause a 50% reduction in plant growth) in 10 accessions that were least to most sensitive to glyphosate (7 pitted, 2 hybrid, and 1 sharppod morningglory). Glyphosate GR50 doses ranged from 0.65 to 1.23 kg/ha, a two-fold variability in tolerance to glyphosate among the 7 pitted morningglory accessions. Increasing levels of tolerance were associated with the absence of a leaf notch. These results indicate the existence of variable tolerance to a sublethal dose of glyphosate among accessions of pitted morningglory.

Flame weeding is often used for weed control in organic production and other situations where use of herbicides is prohibited or undesirable. Response to cross-flaming was evaluated on five common weed species: common lambsquarters, redroot pigweed, shepherd's-purse, barnyardgrass, and yellow foxtail. Dose-response curves were generated according to species and growth stage. Dicot species were more effectively controlled than monocot species. Common lambsquarters was susceptible to flame treatment with doses required for 95% control (LD95) ranging from 0.9 to 3.3 kg/km with increasing maturity stage. Comparable levels of control in redroot pigweed required higher doses than common lambsquarters, but adequate control was still achieved. Flaming effectively controlled shepherd's-purse at the cotyledon stage (LD95 = 1.2 kg/km). However, the LD95 for weeds with two to five leaves increased to 2.5 kg/km, likely due to the rosette stage of growth, which allowed treated weeds to avoid thermal injury. Control of barnyardgrass and yellow foxtail was poor, with weed survival > 50% for all maturity stages and flaming doses tested. Flame weeding can be an effective and labor-saving weed control method, the extent of which is partially dependent on the weed flora present. Knowledge of the local weed flora and their susceptibility to flame weeding is vital for the effective use of this method.

Natural products might provide an organic means of weed control. Our objective was to evaluate the potential use of vinegar and a clove-oil product with regard to how volume, concentration, and application timing affect weed control and crop response. Treatments included broadcast applications of 200- and 300-grain vinegar at 318 liters per hectare (L/ha), 150- and 200-grain vinegar at 636 L/ha, a 3.4% v/v clove oil mixture in water (318 L/ha), and a 1.7% clove oil mixture in 200-grain vinegar (318 L/ha). Field trials were conducted in sweet corn, onion, and potato. Weed control, weed biomass, crop injury, and yield data were collected. Corn treated at 15 and at 30 to 45 cm was initially burned and stunted by these products. By 4 wk after application much of the initial injury was outgrown. Late applications significantly reduced yields of early-maturing sweet corn ‘Trinity’. With the exception of the 200-grain vinegar (318 L/ha) treatment, early applications to sweet corn ‘Avalon’ did not reduce marketable yield. Two hundred-grain vinegar (636 L/ha) applied to pre-emergence–flag stage onion reduced the duration of the first handweeding by 59 to 67%. All treatments reduced onion yields when treated at the 2-leaf stage. Potato treated early (2 to 10 cm) and late (30 cm) were injured by all vinegar treatments 59 to 83%, 1 d after treatment (DAT). Potato yield losses were insignificant with applications of 3.4% clove oil and with some low-volume (318 L/ha) vinegar treatments. Product efficacy was dependent on the weed species and their size at the time of application. Weed control was greatest (83%, 1 DAT) with 200-grain vinegar (636 L/ha). Broadcast applications of vinegar and clove oil have potential for use on young, actively growing sweet corn, onion, and potato.

Herbicide-resistant weeds have impacted crop production throughout the United States, but the effect they have on extension programming has not been evaluated. In June 2007, 38 extension weed specialists throughout the United States, responded to a survey on herbicide-resistant (HR) weeds and the impact they are having on extension education programming. Survey results revealed that HR weeds have had a significant impact on extension programming particularly for agronomic crops. In the last 10 yr, agronomic weed specialists' extension programming was almost twice as likely to be impacted by the presence of HR weeds as compared to horticultural programming. In the next 5 yr, agronomic extension programming is twice as likely to be altered. Of 37 weed species reported, seven genera or species of weeds represented 80% of the major HR biotypes reported. These include Amaranthus species, horseweed, Setaria species, common lambsquarters, kochia, giant ragweed, and Lolium species. Five weed species (common ragweed, common lambsquarters, horseweed, kochia, and three foxtail species) exhibited weed by mode of action (MOA) interactions when evaluated as major or minor problems. Herbicide resistance problem severity differed for weed species, herbicide MOA, and crops. The results of this survey of university extension personnel confirm that HR weeds have impacted extension programming and will continue to impact programming in the future.

Weed management can be difficult and expensive in organic agricultural systems. Because of the potentially high cost of the natural product herbicides vinegar and clove oil, their efficacy with regard to weed species growth stages needs to be determined. A further objective was to identify anatomical and morphological features of redroot pigweed and velvetleaf that influence the effectiveness of vinegar and clove oil. Research was conducted on greenhouse-grown cotyledon, two-leaf, and four-leaf redroot pigweed and velvetleaf. Dose–response treatments for vinegar included 150-, 200-, 250-, and 300-grain vinegar at 318 L/ha and at 636 L/ha. Clove oil treatments included 1.7, 3.4, 5.1, and 6.8% (v/v) dilutions of a clove oil product in water (318 L/ha), and a 1.7% (v/v) dilution in 200-grain vinegar (318 L/ha). An untreated control was included. Separate plantings of velvetleaf and pigweed were treated with vinegar or clove oil and were used to study anatomical and morphological differences between the two species. Redroot pigweed was easier to control with both products than velvetleaf. Whereas 200-grain vinegar applied at 636 L/ha provided 100% control (6 d after treatment [DAT]) and mortality (9 DAT) of two-leaf redroot pigweed, this same treatment on two-leaf velvetleaf provided only 73% control and 18% mortality. The obtuse leaf blade angle in velvetleaf moved product away from the shoot tip, whereas in pigweed, the acute leaf blade angle, deep central leaf vein, and groove on the upper side of the leaf petiole facilitated product movement toward the stem axis and shoot tip. For both species, and at all application timings, 150-grain vinegar at 636 L/ha provided control equal to that of 300-grain vinegar at 318 L/ha. As growth stage advanced, control and biomass reduction decreased and survival increased. Application timing will be critical to maximizing weed control with vinegar and clove oil.

Few herbicides are available for weed control in vegetable production systems using low-density polyethylene (LDPE) plastic mulch. With the elimination of methyl bromide for pest management and subsequent use of various alternative fumigants, the need for herbicides in vegetable production systems has increased. An experiment was conducted to evaluate tolerance of transplant summer squash and tomato to carfentrazone, flumioxazin, glyphosate, halosulfuron, or paraquat applied to the mulch prior to transplanting. After applying herbicides overtop of the mulch but prior to vegetable transplant, the mulch was either irrigated with 1.0 cm of water or not irrigated. Carfentrazone did not affect either crop regardless of irrigation. Irrigation readily removed glyphosate and paraquat from the mulch, as there was no adverse crop injury in these treatments. In the absence of irrigation, glyphosate and paraquat reduced squash diameter and tomato heights 18 to 34% at 3 wk after transplanting (WAT). Squash and tomato fruit numbers and fruit biomass (yield) were reduced 17 to 37%, and 25 to 33%, respectively. Halosulfuron reduced squash diameter and yield 71 to 74% and tomato heights and yields 16 to 37% when mulch was not irrigated prior to transplanting. After irrigating, halosulfuron had no affect on tomato, but reduced squash growth and yield 40 to 44%. Flumioxazin killed both crops when the mulch was not irrigated; and reduced squash yield 56% when irrigated. With irrigation, flumioxazin did not impact tomato fruit number, but did reduce tomato weight by 25%. These studies demonstrate the safety of carfentrazone, applied on mulch prior to transplanting either squash or tomato, regardless of irrigation, and also demonstrate the safety of glyphosate and paraquat if irrigated prior to transplanting. Conversely, flumioxazin should not be applied over mulch before transplanting either crop, regardless of irrigation. Halosulfuron application over mulch should be avoided before transplanting squash, regardless of irrigation, but can be applied prior to transplanting tomato if irrigated.

New Zealand bittercress is reported as new to the United States. While collecting specimens to determine what Cardamine species occur in the nursery trade, New Zealand bittercress was discovered in a container nursery in Wilkes County, North Carolina. The nursery tracked the shipment of contaminated plants to a wholesale nursery in Washington County, Oregon. It was subsequently confirmed that New Zealand bittercress also occurs in a nursery in Clackamas County, Oregon, and has likely been distributed throughout the United States as a contaminant in container grown ornamental plants. Thus far there have been no reports of naturalized populations outside of container nursery crop production facilities.

Diflufenzopyr is a synergist that has improved the efficacy of certain auxin-type herbicides such as dicamba on many broadleaf weed species. However, little is known regarding the activity of diflufenzopyr with other auxin-type herbicides. Russian knapweed is an invasive creeping perennial that is susceptible to certain pyridine carboxylic acids, which are auxin-type herbicides. The objective of this research was to determine if the addition of diflufenzopyr to three pyridine carboxylic acid herbicides enhances long-term control of Russian knapweed in Wyoming. All treatments were applied in the fall. Treatments included aminopyralid (0, 0.05, 0.09, and 0.12 kg ae/ha), clopyralid (0, 0.16, 0.21, 0.31, and 0.42 kg ae/ha) and picloram (0, 0.14, 0.28, 0.42, and 0.56 kg ae/ha), applied with and without diflufenzopyr (0.06 and 0.11 kg ae/ha). Twelve mo after treatment (MAT), diflufenzopyr had no significant impact on Russian knapweed control with either aminopyralid or picloram, and had significant but inconsistent impacts on knapweed control with clopyralid. At 24 MAT, diflufenzopyr did not enhance Russian knapweed control with either aminopyralid or clopyralid and was slightly antagonistic with picloram. These results indicate that the addition of diflufenzopyr does not improve Russian knapweed control with fall applications of either aminopyralid, clopyralid, or picloram.

Researchers interested in describing or understanding agroecological systems have many reasons to consider on-farm research. Yet, despite the inherent realism and pedagogical value of on-farm studies, recruiting cooperators can be difficult and this difficulty can result in so-called “convenience samples” containing a potentially large and unknown bias. There is often no formal justification for claiming that on-farm research results can be extrapolated to farms beyond those participating in the study. In some sufficiently well-understood research areas, models may be able to correct for potential bias; however, no theoretical argument is as persuasive as a direct comparison between a randomized and a convenience sample. In a 30-cooperator on-farm study investigating weed community dynamics across the state of Wisconsin, we distributed a written survey probing farmer weed management behaviors and attitudes. The survey contained 59 questions that overlapped a large, randomized survey of farmer corn pest management behavior. We compared 187 respondents from the larger survey with the 18 respondents from our on-farm study. For dichotomous response questions, we found no difference in response rate for 80% of the questions (α = 0.2, β > 0.5). Differences between the two groups were logically connected to the selection criteria used to recruit cooperators in the on-farm study. Similarly, comparisons of nondichotomous response questions did not differ for 80% of the questions (α = 0.05, β > 0.9). Exploratory multivariate analyses failed to reveal differences that might have been hidden from the marginal analyses. We argue that our findings support the notion that the convenience samples often associated with on-farm research may be representative of the more general class of farms, despite lack of bias protection provided by truly randomized designs.

Field studies were conducted in 2001 and 2002 to determine the effect of tillage on the emergence of common waterhemp from the soil seedbank. Emergence of common waterhemp was three times greater in no-till than chisel-till cultivation. Tillage did not affect the initial time of emergence; however, the time to 50% emergence was longer in no-till than chisel till. Duration of emergence did not differ among tillage systems. Common waterhemp seed was concentrated near the soil surface in no-till plots, whereas seed in the chisel-till plots were primarily found between 9 and 15 cm. The delayed and increased emergence in no-till cultivation may contribute to the greater problems in managing common waterhemp in no-till plots compared with plots where tillage is used.