Hostname: page-component-669899f699-qzcqf Total loading time: 0 Render date: 2025-04-25T23:07:20.146Z Has data issue: false hasContentIssue false
  • English
  • Français

Design and analysis of a reconfigurable mechanism based on double slider morphing mechanism

Published online by Cambridge University Press:  11 April 2025

Shiqing Lu ,
Yiqing Xie Open the ORCID record for Yiqing Xie [Opens in a new window] ,
Weiqiang Lyu ,
Hui Jin ,
Xia Huang Open the ORCID record for Xia Huang [Opens in a new window]  and
Jun Ding
Shiqing Lu
Affiliation:
College of Mechanical Engineering, Chongqing University of Technology, Chongqing, China
Yiqing Xie
Affiliation:
College of Mechanical Engineering, Chongqing University of Technology, Chongqing, China
Weiqiang Lyu
Affiliation:
Electrical and Computer Engineering, University of Alabama, Tuscaloosa, AL, USA
Hui Jin*
Affiliation:
College of Mechanical Engineering, Chongqing University of Technology, Chongqing, China
Xia Huang
Affiliation:
College of Mechanical Engineering, Chongqing University of Technology, Chongqing, China
Jun Ding
Affiliation:
College of Mechanical Engineering, Chongqing University of Technology, Chongqing, China
*
Corresponding author: Hui Jin; Email: [email protected]
Get access Rights & Permissions [Opens in a new window]

Abstract

In this paper, a novel special structure derived from the double-slider mechanism is presented and apply it to the design of a parallel mechanism, endowing the designed parallel mechanism with reconfigurable characteristics. First, a comprehensive analysis of the motion modes of the double-slider mechanism is carried out. By ingeniously varying the slider structure of the double-slider mechanism, a special structure capable of three distinct motion modes is obtained. This special structure is then integrated into the 3UPU parallel mechanism. As a result, the redesigned 3UPU parallel mechanism exhibits reconfigurability and can seamlessly switch among the three motion modes. Subsequently, the inverse kinematics, workspace, and singular pose of the parallel mechanism in these three modes are meticulously analyzed. Moreover, the Jacobian matrix is utilized to evaluate its flexibility and load-bearing performance. The analysis reveals that in different motion modes, all performance indicators of the mechanism are remarkable, indicating a promising application prospect. Finally, a prototype is fabricated using 3D printing technology to further validate the effectiveness of the proposed special structure. Additionally, its versatility is further explored and analyzed in-depth.

Keywords

reconfigurable parallel mechanismdouble-slider mechanismscrew theorykinematics analysisperformance evaluation
Type
Research Article
Information
Robotica , First View , pp. 1 - 19
Copyright
© The Author(s), 2025. Published by Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

Saiki, N., Tadakuma, K., Watanabe, M., Takane, E., Nobutoki, M., Suzuki, S., Konyo, M. and S, “Tadokoro, 2-DOF spherical parallel mechanism capable of biaxial swing motion with active arc sliders,” IEEE Robot. Autom. Lett. 6(3), 4680–4687 (2021).CrossRefGoogle Scholar
You, J. J., Xi, F. F., Shen, H. P., Wang, J. Y. and Yang, X. L., “A novel Stewart-type parallel mechanism with topological reconfiguration: Design, kinematics and stiffness evaluation,” Mech. Mach. Theory 162, 104329 (2021).CrossRefGoogle Scholar
Nag, A. and Bandyopadhyay, S., “Singularity-free spheres in the position and orientation workspaces of Stewart platform manipulators,” Mech. Mach. Theory 155, 104041 (2021).CrossRefGoogle Scholar
Horoub, M. M., Hassan, M. and Hawwa, M. A., “Workspace analysis of a Gough-Stewart type cable marine platform subjected to harmonic water waves,” Mech. Mach. Theory 120, 314–325 (2018).CrossRefGoogle Scholar
Wu, P., Zhao, P. F., Cheng, L. X., Shi, Y. and Wang, Z. Y., “Research on trajectory tracking control of delta high-speed parallel robot based on PTNTSMC,” J. Braz. Soc. Mech. Sci. 46(9), 562 (2024).CrossRefGoogle Scholar
Edoimioya, N., Chou, C. H. and Okwudire, C. E., “Vibration compensation of delta 3D printer with position-varying dynamics using filtered B-splines,” Int. J. Adv. Manuf. Technol. 125(5-6), 2851–2868 (2023).CrossRefGoogle Scholar
Guo, J. W., Li, X. Y., Liu, Z. Y., Zhang, S. H., Wu, J. P., Li, C. and Long, J. Y., “A novel doublet extreme learning machines for Delta 3D printer fault diagnosis using attitude sensor,” ISA Trans. 109, 327–339 (2021).CrossRefGoogle ScholarPubMed
Wu, M. K., Mei, J. P., Zhao, Y. Q. and Niu, W. T., “Vibration reduction of delta robot based on trajectory planning,” Mech. Mach. Theory 153, 104004 (2020).CrossRefGoogle Scholar
Ding, J. Z. and Wang, C. J., “Accuracy analysis and error compensation for Tricept machine tool under load,” J. Mech. Sci. Technol. 35(8), 3591–3600 (2021).CrossRefGoogle Scholar
Siciliano, B., “The Tricept robot: Inverse kinematics, manipulability analysis and closed-loop direct kinematics algorithm,” Robotica 17(4), 17437–445 (1999).CrossRefGoogle Scholar
Tang, T. F., Fang, H. L., Luo, H. W., Song, Y. Q. and Zhang, J., “Type synthesis, unified kinematic analysis and prototype validation of a family of exechon inspired parallel mechanisms for 5-axis hybrid kinematic machine tools,” Robot. Comput.-Int. Manuf. 72, 102181 (2021).CrossRefGoogle Scholar
Hu, B., Shi, Y. G., Xu, L. Z. and Bai, P., “Reconsideration of terminal constraint/mobility and kinematics of 5-DOF hybrid manipulators formed by one 2R1T PM and one RR SM,” Mech. Mach. Theory 149, 103837 (2020).CrossRefGoogle Scholar
Hu, B., “Kinematically identical manipulators for the Exechon parallel manipulator and their comparison study,” Mech. Mach. Theory 103, 117–137 (2016).CrossRefGoogle Scholar
Song, Y. M., Xian, W., Huo, X. M. and Qi, Y., “Type synthesis of parallel mechanism with 3T/3R motion patterns,” Mech. Mach. Theory 186, 105349 (2023).CrossRefGoogle Scholar
Deng, Z. Z., Zhang, Y. L. and Yan, S. Z., “Type synthesis of metamorphic and axisymmetric parallel mechanisms using singularity for deployment and latch,” Mech. Mach. Theory 189, 105441 (2023).CrossRefGoogle Scholar
Liu, Y., Li, Y. Z., Yao, Y. A. and Kong, X. W., “Type synthesis of multi-mode mobile parallel mechanisms based on refined virtual chain approach,” Mech. Mach. Theory 152, 103908 (2020).CrossRefGoogle Scholar
Li, B., Wang, S. Y. and L.Liu, X. H. Z., “Kinematics performance comparison of a family of 3-RPS parallel mechanisms affected by limb arrangement,” Appl. Mech. Mater. 536-537, 939–943 (2014).Google Scholar
Li, S. H., Gao, X. Y., Wu, Y. B., Sun, J. and Shan, Y. X., “Research on configuration synthesis method of multi-mode parallel mechanism based on lockable joints,” J. Braz. Soc. Mech. Sci. Eng. 45(6), 322 (2023).CrossRefGoogle Scholar
Lin, R. F. and Guo, W. Z., “Type synthesis of reconfiguration parallel mechanisms transforming between trusses and mechanisms based on friction self-locking composite joints,” Mech. Mach. Theory 168, 104597 (2022).CrossRefGoogle Scholar
Li, L. Q., Zhang, D. and Tian, C. X., “A family of generalized single-loop RCM parallel mechanisms: Structure synthesis, kinematic model, and case study,” Mech. Mach. Theory 195, 105606 (2024).CrossRefGoogle Scholar
Ye, W., Chai, X. X. and Zhang, K. T., “Kinematic modeling and optimization of a new reconfigurable parallel mechanism,” Mech. Mach. Theory 149, 103850 (2020).CrossRefGoogle Scholar
Gan, D. M., Dai, J. S. and Liao, Q. Z., “Constraint analysis on mobility change of a novel metamorphic parallel mechanism,” Mech. Mach. Theory 45(12), 1864–1876 (2010).CrossRefGoogle Scholar
Zhang, K. T., Dai, J. S. and Fang, Y. F., “Topology and constraint analysis of phase change in the metamorphic chain and its evolved mechanism,” J. Mech. Des. 132(12), 121001 (2010).CrossRefGoogle Scholar
Carbonari, L., Callegari, M., Palmieri, G. and Palpacelli, M. C., “A new class of reconfigurable parallel kinematic machines,” Mech. Mach. Theory 79, 173–183 (2014).CrossRefGoogle Scholar
Palpacelli, M. C., Carbonari, L., Palmieri, G. and Callegari, M., “Analysis and design of a reconfigurable 3-DoF parallel manipulator for multimodal tasks,” IEEE/ASME Trans. Mechatron. 20(4), 1975–1985 (2015).CrossRefGoogle Scholar
Liu, X. J. and Wang, J. S., “Some new parallel mechanisms containing the planar four-bar parallelogram,” Int. J. Robot. Res. 22(9), 717–732 (2003).CrossRefGoogle Scholar
Liu, X.-J., Wang, J. and Pritschow, G., “A new family of spatial 3-DoF fully-parallel manipulators with high rotational capability,” Mech. Mach. Theory 40(4), 475–494 (2005).CrossRefGoogle Scholar
Liu, H. T., Xu, K., Shen, H. P., Shan, X. L. and Yang, T. L., “Type synthesis of 1T2R parallel mechanisms using structure coupling-reducing method,” Chin. J. Mech. Eng. 32(1), 1–10 (2019).CrossRefGoogle Scholar
Wu, G. L., “Optimal structural design of a Biglide parallel drill grinder,” Int. J. Adv. Manuf. Technol. 90(9-12), 2979–2990 (2017).CrossRefGoogle Scholar
Wang, R. Z. and Zhang, X. M., “Optimal design of a planar parallel 3-DOF nanopositioner with multi-objective,” Mech. Mach. Theory 112, 61–83 (2017).CrossRefGoogle Scholar
Baron, N., Philippides, A. and Rojas, N., “On the false positives and false negatives of the Jacobian matrix in kinematically redundant parallel mechanisms,” IEEE Trans. Robot. 36(3), 951–958 (2020).CrossRefGoogle Scholar
Yang, C., Ye, W. and Li, Q. C., “Review of the performance optimization of parallel manipulators,” Mech. Mach. Theory 170, 104725 (2022).CrossRefGoogle Scholar
Hamida, I. B., Laribi, M. A., Mlika, A., Romdhane, L. and Zeghloul, S., “Dimensional synthesis and performance evaluation of four translational parallel manipulators,” Robotica 39(2), 233–249 (2021).CrossRefGoogle Scholar
Wu, X. Y. and Bai, S. P., “Analytical determination of shape singularities for three types of parallel manipulators,” Mech. Mach. Theory 149, 103812 (2020).CrossRefGoogle Scholar
Zhao, C., Song, J. K., Chen, X. C., Chen, Z. M. and Ding, H. F., “Optimum seeking of redundant actuators for M-RCM 3-UPU parallel mechanism,” Chin. J. Mech. Eng. 34(1), 121 (2021).CrossRefGoogle Scholar
Merlet, J. P., “Jacobian, manipulability, condition number, and accuracy of parallel robots,” J. Mech. Des. 128(129), 199–206 (2006).CrossRefGoogle Scholar
Zeng, D. X., Huang, Z. and W.J., L., “Performance analysis and optimal design of a 3-DOF 3-PRUR parallel mechanism,” J. Mech. Des. 130(4), 042307 (2008).CrossRefGoogle Scholar