Hostname: page-component-55f67697df-sqlfs Total loading time: 0 Render date: 2025-05-10T21:09:52.763Z Has data issue: false hasContentIssue false
  • English
  • Français

The Future of TCO Materials: Stakes and Challenges

Published online by Cambridge University Press:  31 January 2011

Marie-Isabelle Baraton
Marie-Isabelle Baraton*
Affiliation:
[email protected], University of Limoges & CNRS, SPCTS, 123 Avenue Albert Thomas, Limoges, 87060, France
Get access

Abstract

The field of major applications of transparent conducting oxides (TCOs) continues to expand, thus generating a growing demand for new materials with lower resistivity and higher transparency over extended wavelength ranges. Moreover, p-type TCOs are opening new horizons for high-performance devices based on p-n junctions. Among the most commonly used TCO materials are zinc oxide (ZnO), indium tin oxide (ITO), tin oxide (SnO2), and indium oxide (In2O3). Still, design and synthesis of improved TCO materials leading to a marked increase in conductivity and robustness remain highly desirable while a more detailed understanding of the conductivity mechanisms is critical to further improvement. For example, there is an accelerating effort worldwide by both academia and industry to develop a transparent conductor that can meet or beat the performance of the commonly used ITO at lower costs and with more physical resilience. This article reviews new developments in TCO materials to be used in various applications spanning from photovoltaics to lighting, smart windows, or gas sensors. The financial stakes, far from being negligible in the TCOs market, and the current scientific and technological challenges to be taken up are analyzed.

Keywords

transparent conductorphotovoltaicdisplay
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1209: Symposia P/YY – Business and Safety Issues in the Commercialization of Nanotechnology , 2009 , 1209-P03-06
Copyright
Copyright © Materials Research Society 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1 Exarhos, G.J. and Zhou, X.-D., “Discovery-based design of transparent conducting oxide films”, Thin Solid Films 515, 7025–7052 (2007).Google Scholar
2 Lewis, B.G. and Paine, D.C. “Applications and processing of transparent conducting oxides”, MRS Bulletin 25, 22–27 (2000).Google Scholar
3Ecomine, May/June 2009, pp. 30–32, http://www.developpement-durable.gouv.fr/energie/matieres/f1e mat.htm Google Scholar
4Nippon Mining & Metals Co, Ltd, http://www.nikko-metal.co.jp/e Google Scholar
5Nanomarkets: http://www.nanomarkets.net Google Scholar
6DisplaySearch: http://www.displaysearch.com Google Scholar
7 Ohsaki, H. and Kokubu, Y., “Global market and technology trends on coated glass for architectural, automotive and display applications”, Thin Solid Films 351, 1–7 (1999).Google Scholar
8IDTechEx: Photovoltaics – The Macroeconomic View, 20 May 2008: http://www.idtechex.com/research Google Scholar
9 Gerhardinger, P. and Strickler, D., “Fluorine doped tin oxide coatings – Over 50 years and going strong”, Key Engineering Materials 380, 169–178 (2008).Google Scholar
10 Gordon, R.G. “Criteria for choosing transparent conductors”, MRS Bulletin 25, 52–57 (2000).Google Scholar
11 Granqvist, C.G. Azens, A., Heszler, P., Kish, L.B. and Österlund, L., “Nanomaterials for begnin indoor environments: Electrochromics for ‘smart windows’, sensors for air quality, and photo-catalysts for air cleaning”, Solar Energy Materials and Solar Cells 91, 355–365 (2007).Google Scholar
12 Gray, M.J. and Strobl, K., “Off-line APCVD offers paradigm shift for TCO glass end users”, Photovoltaics World Magazine, 24 Nov. 2009,http://www.renewableenergyworld.com/rea/magazine/pv-world/ Google Scholar
13MNT Gas Sensor Roadmap, MNT Gas Sensor Forum, December 2006 Google Scholar
14Freedonia : http://www.freedoniagroup.com Google Scholar
15 Baraton, M.-I., Ed. Sensors for Environment, Health and Security: Advanced Materials and Technologies, NATO Science for Peace and Security Series, Springer, Dordrecht (The Netherlands), 2009.Google Scholar
16 Baraton, M.-I. and Merhari, L., “Advances in air quality monitoring via nanotechnology”, Journal of Nanoparticle Research 6, 107–117 (2004).Google Scholar
17 Coutts, T.J. Young, D.L. and Li, X., “Characterization of transparent conducting oxides”, MRS Bulletin 25, 58–65 (2000).Google Scholar
18 Hosono, H., Ohtaa, H., Oritaa, M., Uedab, K., and Hiranoa, M., “Frontier of transparent conductive oxide thin films”, Vacuum 66, 419–425 (2002).Google Scholar
19 Kawazoe, H., Yanagi, H., Ueda, K., and Hosono, H., “Transparent p-type conducting oxides: Design and fabrication of p-n heterojunctions”, MRS Bulletin 25, 28–36 (2000).Google Scholar
20 Ginley, D.S. and Bright, C., “Transparent conducting oxides”, MRS Bulletin 25, 15–18 (2000).Google Scholar
21 Bhosle, V., “>Novel transparent conductors based on molybdenum oxide and gallium doped ZnO”, Ph.D. Thesis North Carolina State University, Raleigh (USA), 2007 Novel+transparent+conductors+based+on+molybdenum+oxide+and+gallium+doped+ZnO”,+Ph.D.+Thesis+North+Carolina+State+University,+Raleigh+(USA),+2007>Google Scholar
22 Ingram, B.J. Gonzalez, G.B. Kammler, D.R. Bertoni, M.I. and Mason, T.O. “Chemical and structural factors governing transparent conductivity in oxides”, Journal of Electroceramics 13, 167–175 (2004).Google Scholar
23EuroAsia Semiconductor Magazine, July 2009, http://www.euroasiasemiconductor.com Google Scholar
24 Baraton, M.-I. and Merhari, L., “Surface properties control of semiconducting metal oxides nanoparticles”, NanoStructured Materials 10, 699–713 (1998).Google Scholar
25 Baraton, M.-I., “Chemical phenomena at the surface of nanoparticles” in Functional Gradient Materials and Surface Layers Prepared by Fine Particles Technology, NATO Science Series, Baraton, M.-I. Ed., Kluwer Academic Publishers, Dordrecht, pp. 45–60 (2001).Google Scholar
26 U.S. Geological Survey, Mineral Commodity Summaries, January 2009, pp. 76–77.Google Scholar
27 Freeman, A.J. Poeppelmeier, K.R. Mason, T.O. Chang, R.P.H. and Marks, T.J. “Chemical and thin-film strategies for new transparent conducting oxides”, MRS Bulletin 25, 45–51 (2000).Google Scholar
28 Minami, T., “Newn-type transparent conducting oxides”, MRS Bulletin 25, 38–44 (2000).Google Scholar
29 Hosono, H., “Recent progress in transparent oxide semiconductors: Material and device application”, Thin Solid Films 515, 6000–6014 (2007).Google Scholar
30World Intellectual Property Organization: http://www.wipo.int/Google Scholar
31 Weeks, C., Peltola, J., Levitsky, I., Glatkowski, P., Lagemaat, J. van de, Rumbles, G., Barnes, T., and Coutts, T., “Single-wall carbon nanotubes as transparent electrodes for photovoltaics” IEEE 4th World Conference on Photovoltaic Energy Conversion, Conference Record, Vol. 1, pp. 295–297 (2006) (DOI 10.1109/WCPEC.2006.279449).Google Scholar
32Eikos: http://www.eikos.comGoogle Scholar
33 Johnson, S., Kerr, J., Liu, G., Mao, S., and A. Minor, “Air-stable nanomaterials for efficient OLEDs and solar cells”, submitted paper.Google Scholar
34 De, S., Higgins, T.M. Lyons, P.E. Doherty, E.M. Nirmalraj, P.N. Blau, W.J. Boland, J.J. and Coleman, J.N. “Silver nanowire networks as flexible, transparent, conducting films: Extremely high DC to optical conductivity ratios”, ACS Nano 3, 1767–1774 (2009).Google Scholar
35 Edwards, P.P. Porch, A., Jones, M.O. Morgan, D.V. and Perks, R.M. “Basic materials physics of transparent conducting oxides”, Journal of the Royal Society of Chemistry, Dalton Transactions, 2995-3002 (2004).Google Scholar