Hostname: page-component-669899f699-tzmfd Total loading time: 0 Render date: 2025-05-03T00:49:28.054Z Has data issue: false hasContentIssue false
  • English
  • Français

Dimension and Damage Control in Sintering of Multilayer Powder Composites

Published online by Cambridge University Press:  01 February 2011

Eugene A. Olevsky ,
Andrey L. Maximenko ,
John H. Arterberry  and
Veena Tikare
Eugene A. Olevsky
Affiliation:
Mechanical Engineering Department San Diego State University 5500 Campanile Drive, San Diego, CA 92182-1323
Andrey L. Maximenko
Affiliation:
Mechanical Engineering Department San Diego State University 5500 Campanile Drive, San Diego, CA 92182-1323
John H. Arterberry
Affiliation:
Mechanical Engineering Department San Diego State University 5500 Campanile Drive, San Diego, CA 92182-1323
Veena Tikare
Affiliation:
Sandia National Laboratories Albuquerque, NM 87185
Get access

Abstract

Sintering distortions of two and three-layer composite powder structures are determined based upon the continuum theory of sintering implemented in a finite element computer code. The macroscopic constitutive parameters of the powder material are obtained on the basis of the meso-scale simulations of a realistic grain-pore structure. The model follows both the densification and the damage development during sintering using a new fracture criterion for the prediction of macroscopic strength in sintering.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 731: Symposium W – Modeling and Numerical Simulation of Materials Behavior and Evolution , 2002 , W7.4
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

[1]. Olevsky, E. and Skorohod, V., Deformation aspects of anisotropic-porous bodies sintering, J. de Physique IV, C7, v.3, 739–742, (1993)Google Scholar
[2]. Olevsky, E., Theory of sintering: from discrete to continuum. Invited Review, Mater. Sci. & Eng. R. Reviews, 23, 41–100 (1998)Google Scholar
[3]. Olevsky, E.A. and German, R.M., Effect of gravity on dimensional change during sintering, I. Shrinkage anisotropy, Acta Mater., 48, 1153–1166 (2000)Google Scholar
[4]. Olevsky, E.A. and Tikare, V., Combined macro-meso scale modeling of sintering. Part I: Continuum approach, in: Recent Developments in: Computer Modeling of Powder Metallurgy Processes, ed. Zavaliangos, A. and Laptev, A., IOS Press, 85–93 (2001)Google Scholar