Hostname: page-component-669899f699-7tmb6 Total loading time: 0 Render date: 2025-05-03T05:05:37.753Z Has data issue: false hasContentIssue false
  • English
  • Français

Preparation and Analysis of Ti and Alloyed Ti Surfaces Used in the Evaluation of Biological Response

Published online by Cambridge University Press:  26 February 2011

J. Lausmaa ,
M. Ask ,
U. Rolander  and
B. Kasemo
J. Lausmaa
Affiliation:
Department of Physics, Chalmers University of Technology, S-412 96 Göteborg, Sweden The Institute for Applied Biotechnology, Box 33053, S-400 33 Göteborg, Sweden
M. Ask
Affiliation:
Department of Physics, Chalmers University of Technology, S-412 96 Göteborg, Sweden
U. Rolander
Affiliation:
Department of Physics, Chalmers University of Technology, S-412 96 Göteborg, Sweden
B. Kasemo
Affiliation:
Department of Physics, Chalmers University of Technology, S-412 96 Göteborg, Sweden
Get access

Abstract

The biocompatibility of Ti and Ti alloys is closely associated with the passivating surface oxide which covers these materials. In this paper results are presented from a broad surface characterization of pure Ti and Ti6A14V alloy surface oxides prepared by thermal oxidation by machining, or by electrochemical procedures (electropolishing and anodic oxidation). The chemical composition of the surface oxide on both materials is mainly TiO2, as shown by XPS, AES, and SIMS analyses. Significant differences exist for both the thermal and anodic oxides, in that the alloying elements are present in the surface oxide of the alloy. TEM and STEM studies show that the microstructure of the anodic oxide films is rather heterogeneous with areas of different porosity which can be correlated with the grain structure of the bulk metals. Oxides on the alloy are even more heterogeneous than on Ti, due to the more complex (two-phase) microstructure of the bulk metal, and also differ in crystallinity. The differences in the surface oxide properties can be expected to lead to differences in the biological response to these two materials. With the alloy, one must consider the risk of Al and/or V dissolution into the biological system.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 110: Symposium M – Biomedical Materials and Devices , 1987 , 647
Copyright
Copyright © Materials Research Society 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Zarb, G.A., BrAnemark, P-L. and Albrektsson, T. (Eds.), Tissue Integrated Prostheses: Osseointegration in Clinical Practice, Quintessence, Chicago, 1985 Google Scholar
2. Kasemo, B. and Lausmaa, J., CRC Crit. Rev. Biocomp. 2 (1986), 335, and in Ratner, B.D. (Ed.), Surface Characterizationo f Biomaterials,Elsevier, New York, 1988 (in press)Google Scholar
3. Grobe, G.L., Baier, R.E., Gardella, J., Hartman, L.C., Meenaghan, M.A., Meyer, A.E. and Salvati, L., Proc. 3rdlnt. Conf. Environmen. Degrad. Eng. Mater., Pennsylvania State Univ., April 1987 Google Scholar
4. Maeusli, P.A., Bloch, P.R., Geret, V. and Steinemann, S.G., Proc. Eur. Conf. Biomaterials Paris, September 1985 Google Scholar
5. Smith, D.C., Pilliar, R.M. and Murray, G., Trans. 11th Ann. Meeting Soc. Biomaterials, 8 (1985), 8 Google Scholar
6. Lausmaa, J., Mattsson, L., Rolander, U. and Kasemo, B., MRS Symp. Proc., 55 (1986), 351 Google Scholar
7. Lausmaa, J., Kasemo, B., Rolander, U., Bjursten, L.M., Ericson, L-E., Rosander, L. and Thomsen, P., in Ratner, B.D. (Ed.), Surface Characterizationo of Biomaterials,Elsevier, New York, 1988 (in press)Google Scholar
8. Rolander, U., Mattsson, L., Lausmaa, J. and Kasemo, B. (to be published)Google Scholar
9. Lausmaa, J., Kasemo, B., Mattsson, H. and Odelius, H. (to be published)Google Scholar
10. Ask, M., Rolander, U., Lausmaa, J. and Kasemo, B. (to be published)Google Scholar